WARRANTY

LIMITED WARRANTY

PDW warrants to the original purchaser that its wheels will be free of any defects in material and workmanship for a period of two (2) years after the date of purchase. Warranty is only valid when wheels are properly installed, washed and limited to use on normal road and highway driving conditions.


PDW agrees (at its discretion) to repair or replace any wheel found to be faulty in materials or workmanship after inspection. (For a period of two (2) years date of original purchase to the original purchaser. Original purchase invoice must be supplied.


PDW will not be held responsible for the transportation cost, any damage or loss caused by delays, failure or any consequential damage arising from any cause what-so-ever or any other charges incurred in the replacement of a defective product.


Warranty is automatically void on any wheel that has been altered in any manner, such as bolt circle diameter, offset, centre bore or any of the following conditions;

1. Wash damage, chemicals, caustic cleaning agents, degreaser and climate change.

2. Any appearance defect (scratches) in the wheels that have been damaged during mounting or which have been display.

3. Any defect, malfunction or failure caused by shipping, transporting, off-road use, abuse, accident or negligence caused by any involved party.


Any PDW wheel that does not confirm to this warranty will be repaired or replaced after a Return Authorisation Number (#RAN) has been obtained by contacting your PDW importer/distributor and a dated satisfactory proof of purchase included with the freight prepaid to our facility. Such repair or replacement shall not include removal of installation of any tyre. A PDW representative will review all warranty returns. If returned wheel is found not to be subject to warranty coverage, the wheel will be returned to the sender, without repair or replacement at sender's expense.


THIS LIMITED WARRANTY IS THE SOLE EXPRESS WARRANTY GIVEN BY PDW AND IS IN LIEU FOR ALL OTHER EXPRESS WARRANTIES, WHETHER ORAL OR WRITTEN. ALL IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, LIABILITY FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES. 


BEFORE MOUNTING THE TYRE, MAKE SURE YOU HAVE FOLLOWED THIS CHECKLIST. (FAILURE TO FOLLOW THESE STEPS WILL VOID ANY WARRANTY/RETURN THAT MAY BE APPLICABLE.)

1. Check that the product, colour, bolt pattern (PCD) and fitment is correct. (As per order).

2. Check for protrusions on the hub mounting face. Ensure that wheels are clear of any screws, rivets, retaining clips or balancing weights.

3. The wheel does not come in contact with any of the front or rear hubs, brake callipers, braking or suspension components of the vehicle.

4. Check that the correct hub rings and nuts (if applicable) will be used for the specific vehicle application.


WARNING!

MAKE SURE YOU HAVE THE NUTS/STUDS RETORQUED AFTER 60MILES/100KLMS OF USE. FAILURE TO RETOURQUE COULD CAUSE SERIOUS ACCIDENT RESULTING IN INJURY. RETORQUING MUST BE DONE ANY TIME THE WHEEL NUTS/STUDS ARE REMOVED FOR ANY REASON.


IF ANY TIME YOU HIT A HARD OBJECT (CURB,POTHOLE,ETC) OR HAVE AN ACCIDENT AND HAVE VISUAL DAMAGE, ALWAYS HAVE YOUR WHEELS INSPECTED FR FRACTURE. IF FRACTURE IS FOUND, REPLACE THE WHEEL IMMEDIATELY.